So, you just had a fantastic new patio installed in your backyard. You might think that when it’s in, that’s it. Nothing left to do. Wrong. It’s vital to understand that there’s some maintenance related with owning a paver patio. You will need to full the following on a regular basis:

We discover that spring is a good time to complete patio maintenance. It will keep your patio looking great for the rest of the year. Merely pressure wash all the patio and apply a cleaning solution. There are various types of cleaners made specifically for paver patios. Irrespective of your needs (i.e. grime vs. stains), you’ll be able to discover a cleaner that works for you. Just make certain that the cleaner is appropriate for pavers.

After you have pressure washed and cleaned your patio, you will have to re-install your poly sand. The poly sand is a vital part to your paver patio. Without it, you can find that weeds will start to grow in the joints between the pavers and dust may even start to accumulate. You may also have problems with shifting because water will get in between the paver joints.

Installing the poly sand is definitely quite simple. Give the patio enough time to dry after pressure washing and cleaning it (1-2 days). Then apply the sand with a broom. Merely sweep the poly sand into the joints. It’s a good suggestion to use a compactor throughout this process to help the poly sand settle into the joints. After getting made positive that every joint has an adequate amount of poly sand, use a leaf blower to remove any excess sand from the patio. Finally, you will lightly apply water to the patio to allow the poly sand to set.

Lastly, you’ll want to decide whether or not or to not seal your patio. While this is an optional step, most Clients find that it is quite beneficial. Sealing your patio will assist protect it from staining, keep your poly sand from eroding at a quicker pace, protect it from fading, etc. The longevity of the sealer will range from product to product and might be affected by the surroundings (i.e. exposure to sunlight, heavy visitors, etc.). There are lots of sealers to choose from. It would be best to decide your wants and for those who need a water based or solvent based sealer. You will also want to find out the perfect type of sealer on your pavers. For example, some sealers cannot be used on wet solid pavers. You want to pay close attention to what the directions say when choosing a sealer. Completing your research will help to prevent you from damaging your paver patio.

After putting in the poly sand, it would be best to give the patio loads of time to dry earlier than applying the sealer. You will apply the sealer with a sprayer, making certain the entire patio is covered within the process. Directions for application can fluctuate slightly from product to product, so make sure to comply with the instructions carefully. You’ll want to pay shut attention to the climate as most sealers want 24 hours of drying time before they are often uncovered to rainfall.

If the patio is maintained properly, it will look pristine and you should have fewer issues with things resembling weeds and shifting.

If you loved this informative article and you would love to receive more info concerning Best patio black spot remover generously visit the web site.